If you're driving and suddenly notice the Check Engine Light pop up, it can be concerning. If you get your vehicle scanned and find out that the diagnostic trouble code (DTC) P0135 is present, it’s essential to understand what this code means, what causes it, and how to fix it.
In this article, we will explore everything you need to know about the P0135 code, breaking it down in simple, easy-to-understand terms. This guide will help you understand the significance of the P0135 code, what might trigger it, and steps you can take to resolve it.
What Is the P0135 Code?
The P0135 code refers to an issue with the Oxygen Sensor Heater Circuit Bank 1 Sensor 1. Specifically, the engine control module (ECM) has detected a problem with the heater circuit of the upstream oxygen sensor located on the first bank of the engine.
In modern vehicles, oxygen sensors play a critical role in monitoring the air-to-fuel ratio in the exhaust. There are two types of oxygen sensors: upstream (before the catalytic converter) and downstream (after the catalytic converter). The P0135 code deals specifically with the upstream oxygen sensor, also known as Bank 1 Sensor 1.
This sensor has a built-in heater designed to bring it up to its optimal operating temperature faster. This allows the sensor to give accurate data to the ECM for better fuel management. The P0135 code occurs when the ECM detects that this heater circuit isn’t functioning correctly.
What Does “Bank 1” and “Sensor 1” Mean?
• Bank 1 refers to the side of the engine that houses cylinder number 1. In a V-type engine, there are typically two banks (Bank 1 and Bank 2). Bank 1 is the side where the first cylinder in the firing order is located.
• Sensor 1 refers to the oxygen sensor located upstream (before) the catalytic converter. This sensor monitors the exhaust gases to determine the engine's air-fuel mixture before the gases pass through the catalytic converter.
What Does the Heater in the Oxygen Sensor Do?
Oxygen sensors need to reach a specific operating temperature (around 600°F or 315°C) to provide accurate readings. The heater circuit in the oxygen sensor is there to bring the sensor up to operating temperature faster. If this circuit malfunctions, the sensor will take longer to warm up, which can lead to incorrect air-fuel ratio readings and poor engine performance.
Symptoms of the P0135 Code
When the P0135 code is triggered, you might notice one or more of the following symptoms:
1. Check Engine Light Illuminated. The most common symptom is the Check Engine Light coming on. This is usually the first indication that something is wrong, and when you scan the vehicle with an OBD-II scanner, you'll see the P0135 code displayed.
2. Increased Fuel Consumption. A malfunctioning oxygen sensor can lead to poor fuel efficiency. Since the sensor provides inaccurate data, the engine may run either too rich (excess fuel) or too lean (not enough fuel), leading to inefficient combustion.
3. Rough Idle. You may experience a rough or unstable idle when the oxygen sensor isn’t functioning correctly. This happens because the engine is receiving inaccurate air-fuel ratio data, leading to irregular engine performance.
4. Poor Engine Performance. The P0135 code can also cause a noticeable drop in engine performance. Acceleration may be sluggish, and the vehicle might lack power under load.
5. Failed Emissions Test. If you live in an area that requires emissions testing, a faulty oxygen sensor could cause your vehicle to fail the test. The sensor plays a key role in controlling emissions, and a malfunction could lead to higher levels of pollutants being released into the atmosphere.
Causes of the P0135 Code
The P0135 code is generally triggered by an issue with the oxygen sensor's heater circuit. Several factors can cause this code to appear:
1. Faulty Oxygen Sensor. The most common cause is a faulty oxygen sensor. Over time, the sensor's heater element can wear out, causing it to fail and triggering the P0135 code.
2. Blown Fuse. The oxygen sensor’s heater circuit is typically protected by a fuse. If this fuse blows, the heater won’t function, and the P0135 code will be triggered. It’s essential to check the fuse before replacing the sensor.
3. Wiring Issues. Corroded or damaged wiring in the oxygen sensor’s circuit can prevent the heater from working properly. If the wires are broken, frayed, or disconnected, the ECM won’t be able to send power to the heater circuit.
4. Faulty ECM. Although it’s rare, a malfunctioning ECM can be the cause of the P0135 code. If the ECM isn’t properly controlling the heater circuit, it may incorrectly detect a problem with the sensor.
5. Connectors or Relays. Loose or corroded connectors and relays in the oxygen sensor’s circuit can cause intermittent issues with the heater, triggering the P0135 code.
Diagnosing the P0135 Code
Proper diagnosis of the P0135 code is essential before attempting any repairs. Follow these steps to accurately diagnose the issue:
1. Scan the Vehicle. Use an OBD-II scanner to check for the P0135 code and any related codes. Note any other oxygen sensor or fuel system-related codes that might provide further clues to the problem.
2. Inspect the Wiring. Visually inspect the wiring connected to the Bank 1 Sensor 1 oxygen sensor. Look for any signs of damage, corrosion, or loose connections. If the wiring is damaged, repair or replace it.
3. Check the Fuse. Locate the fuse for the oxygen sensor’s heater circuit and check if it has blown. If the fuse is blown, replace it and see if the P0135 code clears.
4. Test the Oxygen Sensor. If the wiring and fuse are in good condition, the next step is to test the oxygen sensor. You can use a multimeter to check the resistance of the heater circuit. If the resistance is outside the manufacturer’s specifications, the sensor is faulty and needs to be replaced.
5. Test the ECM. If all other components test fine, you may need to test the ECM to ensure it’s functioning correctly. This is rare, but if the ECM isn’t controlling the heater circuit properly, it could be the source of the issue.
How to Fix the P0135 Code
Once you’ve diagnosed the problem, follow these steps to fix the P0135 code:
1. Replace the Oxygen Sensor. If the oxygen sensor is faulty, the most straightforward solution is to replace it. Make sure to replace it with a high-quality part that’s compatible with your vehicle. Replacing the oxygen sensor usually solves the P0135 code.
2. Repair or Replace Damaged Wiring. If the wiring is damaged, repair or replace it as needed. Ensure all connections are secure and free of corrosion.
3. Replace the Blown Fuse. If the fuse is blown, replace it with a new one of the correct amperage. Check the wiring and sensor after replacing the fuse to ensure no further issues.
4. Test and Replace the ECM (if necessary). In very rare cases, the ECM might be the problem. If all other components are functioning correctly, consider testing the ECM or having a professional perform the test. Replace the ECM if needed.
5. Clear the Code. Once the necessary repairs are made, use an OBD-II scanner to clear the P0135 code. After clearing the code, test-drive the vehicle to see if the code reappears.
Preventing the P0135 Code
To avoid the P0135 code from occurring in the future, consider the following preventive measures:
1. Regular Maintenance. Regular vehicle maintenance can prevent issues with the oxygen sensor. Keep up with scheduled inspections and replace sensors as needed to avoid problems.
2. Keep Wiring in Good Condition. Inspect your vehicle's wiring regularly, especially in areas prone to corrosion or damage. Repair any worn or frayed wires immediately.
3. Use Quality Parts. When replacing oxygen sensors or any other components, always use high-quality parts. Cheaper parts may fail sooner, leading to recurring issues.
Final Thoughts
The P0135 code refers to a malfunction in the oxygen sensor heater circuit for Bank 1 Sensor 1. While this can seem like a complicated issue, it’s typically caused by a faulty oxygen sensor, a blown fuse, or damaged wiring. With proper diagnosis and the right repairs, the P0135 code can be resolved, allowing your engine to run efficiently once again.
If you encounter the P0135 code, it’s important to address it promptly to avoid further engine performance issues or poor fuel efficiency. By following the steps outlined in this guide, you can diagnose, fix, and prevent the P0135 code, ensuring your vehicle runs smoothly.
Want more videos all about auto?
Subscribe to our YouTube channel👉Cartech Home
Share with us what you think about this topic to provide another reader more information that this article should have covered.